Sweeper Blade Assemblies                                               To Floor Recovery Systems >
This is for the sweeper blade assembly Part # 76100001, Sweeper Blade Assembly.
Add $30 per additional foot greater than 3'.

To order the correct blade length, measure the rubber edge of the blade.  Blade length = rubber length.  This applies to complete sweeper blade assemblies and to back-up blades.

Sweeper blade assemblies include:
Picture
Click on Image to Enlarge >
  • Steel Strip
  • Rubber Strip
  • (2) nylon bushings
  • (2) bearings
  • (2) end plugs
  • (2) stop blocks
  • (1) yoke assembly
  • ​(1) wire rope clamp
  • blade extrusion
  • 1" Aluminum Pipe
  • (2) shoulder bolts
  • (2) seals
  • (2) spacers
  • (2) roll pins
  • (2) sweeper block ends
Example For Ordering:
  1. If a customer wants a 45" long sweeper blade per the description and illustration shown above.
  2. The customer would determine 45" is longer than 36" shown above for the base length and less than 48" (next one(1) foot increment).
  3. The customer would pay $475.75 (for the base length of 36") plus $30.00 for the additional one (1) foot extra length.
  4. Thus, the customer would pay $505.75 for a 45" long complete sweeper blade.