PD3700E                                                                                To Vacuums >

Specs

Length
Width
Height

Height

Weight



Horsepower

Voltage

Full load Amps
Motor RPM
Filters required

Filters required


9’-9"
9’-0” 
8’-6” (Shipping position) 
12’-5” (Working position)
9,500 lbs. (New filters and completely empty of dust) 
200 (continuous) 
460VAC
3 phase 
230 

1788 
4 (Vacuum dust collector) 
#1000 1245 
1 (Safety filter) #1000 0345
PD3700E Skid Mounted Vacuum System

The SAFE Systems PD 3700E is a skid mounted, heavy duty, high performance vacuum system which is designed for vacuum recovery of abrasives and dust generated in the abrasive blasting process. Fork lift pockets and lifting eyes give the contractor options for easy handling and placement at the jobsite.

Driven by a 200 HP electric motor, the system utilizes a Roots positive displacement (PD) vacuum pump. A wye/delta starting system, limits the starting amperage and torque. The noise levels of both the vacuum pump and electric motor are reduced by a specially designed silencing package which results in the quietest vacuum system on the market today. The vacuum can produce up to 27" Hg (vacuum) and will recover abrasive through long distances of properly attached and configured 4" diameter vacuum hose.

This vacuum is designed to be used in conjunction with a collection device such as our 200 ft³ collection tank (CT-200) or one of our blast and recovery systems, MSH 4-24-2 or MSV 2-15-2. Vacuum recovery rates will vary depending on the material being recovered as well as the length, size and position of the recovery hose.
Picture
Click on Image to Enlarge >
Features:
  • Skid mounted. 
  • Vacuum dust collector rises to working position to allow access for 55-gallon drum. 
  • Forklift pockets. 
  • Certified lifting eyes for handling with overhead crane. 
  • Driven by a 200 HP electric motor. 
  • Belt drive from electric motor to vacuum pump. 
  • Vacuum pump capable of 27” HG (new). 
  • 3700 CFM free air. 
  • Four (4) cartridge filters in the vacuum dust collector. 
  • One (1) cartridge filter in safety filter housing to protect vacuum pump in case of filter failure in vacuum dust collector. 
  • Automatic reverse pulse cleaning system for filters. 
  • 4” vacuum hose connection to vacuum dust collector. 
  • 12 VDC control box. 
  • ¾” air supply required for pulse cleaning system. 
  • Special silencing package to reduce equipment noise. 
  • “On-board” lockable toolbox.
Notes:
  1. Abrasive should not be vacuumed directly into the vacuum dust collector. 
  2. Equipment is designed to be used in conjunction with a vacuum collection tank/hopper. 
  3. Not designed to vacuum wet materials. 
  4. Vacuum dust collector should be emptied every 2 hours. 
  5. The butterfly valve on the dust discharge of the vacuum dust collector must be completely closed during vacuum operations to avoid damage to the valve and/or the dust collector cone.