PD2400E                                                                                        To Vacuums >

BROCHURE >
Specs

Length
Width
Height

Height

Weight



Horsepower

Voltage

Full load Amps
Motor RPM
Filters required


8’-0"
5’-6” 
6’-6” (Shipping position) 
6’-6” (Working position)
6,500 lbs. (New safety filter) 


125 
 
460VAC
3 phase 

136 
1788 
1 (Safety filter) #1000 0345
PD2400E Skid Mounted Vacuum System

The SAFE Systems PD 2400-E is a skid mounted, heavy duty, high performance vacuum system which is designed for vacuum recovery of abrasives and dust generated in the abrasive blasting process. Fork lift pockets and lifting eyes give the contractor options for easy handling and placement at the jobsite.

Driven by a 125 HP electric motor, the system utilizes a Roots positive displacement (PD) vacuum pump. A wye/delta starting system, limits the starting amperage and torque. The noise levels of both the vacuum pump and electric motor are reduced by a specially designed silencing package which results in the quietest vacuum system on the market today. The vacuum can produce up to 27" Hg (vacuum) and will recover abrasive through long distances of properly attached and configured 4" diameter vacuum hose.

This vacuum is designed to be used in conjunction with a collection device such as our 200 ft³ collection tank (CT-200) or one of our blast and recovery systems, MSH 4-24-2 or MSV 2-15-2. Vacuum recovery rates will vary depending on the material being recovered as well as the length, size and position of the recovery hose.
Picture
Click on Image to Enlarge >
Picture
PD2400E with Vacuum Dust Collector,, Click on Image to Enlarge
Features:
  • Skid mounted. 
  • Vacuum dust collector rises to working position to allow access for 55-gallon drum. 
  • Forklift pockets. 
  • Certified lifting eyes for handling with overhead crane. 
  • Driven by a 125 HP electric motor. 
  • Belt drive from electric motor to vacuum pump. 
  • Vacuum pump capable of 27” HG (new). 
  • 2400 CFM free air. 
  • One (1) cartridge filter in safety filter housing to protect vacuum pump in case of filter failure in vacuum dust collector. 
  • Automatic reverse pulse cleaning system for filters. 
  • 4” vacuum hose connection to vacuum dust collector. 
  • 480 VAC control box. 
  • ¾” air supply required for pulse cleaning system. 
  • Special silencing package to reduce equipment noise. 
  • “On-board” lockable toolbox.
Notes:
  1. Abrasive should not be vacuumed directly into the vacuum dust collector. 
  2. Equipment is designed to be used in conjunction with a vacuum collection tank/hopper. 
  3. Not designed to vacuum wet materials. 
  4. Vacuum dust collector should be emptied every 2 hours. 
  5. The butterfly valve on the dust discharge of the vacuum dust collector must be completely closed during vacuum operations to avoid damage to the valve and/or the dust collector cone.