Model DC14000D/E                                                                                    To Dust Collectors >

Specs

Length
Width
Height
Empty Weight
Total Weight     
Pintle Hitch Height
Horsepower
Fuel Storage
Fuel
Fuel Consumption
Filters
Electric Motor
Voltage
Full load Amps


21'-4"
8'-2"
11'-4 3/4"
9,000 lbs
11,650 lbs
22-26"
50
100 Gal
Diesel    
3.4 Gal/hr
18
50 HP
460/3/60
58.9 Amps
14,000 Diesel/Electric Powered, Trailer Mounted, 14,000 CFM Dust Collector

A compact and versatile dust collector, the SAFE Systems DC14,000D/E is powered by a belt-driven 50 HP Diesel engine or 50 HP TEFC Electric Motor and carries 100 gallons of Diesel fuel onboard.

The fan and dust collector are rated at 14,000 CFM @ 20” WC.  An inlet damper on the fan inlet allows regulation of the airflow.

The trailer-mounted 14,000 CFM dust collector is “highway legal” with pintle hitch, dual 7,000# axles, electric brakes and the required lights. It has lifting eyes for handling by crane and can be transported on a double-drop semi-trailer, if needed. A large, container-style door makes filter access easy.

The unit has two (2) 18” diameter dust inlets on each of two sides to give the user greater versatility.  Only two (2) inlets are to be used at a time. The dust collector utilizes eighteen (18) MERV 11 rated filter cartridges which are cleaned by an automatic reverse compressed air pulse cleaning system. The dust falls into the hopper where an auger system makes it easy to remove it into a standard 55 gallon drum.

30 cfm of compressed air is required for the reverse compressed air pulse cleaning system.
Picture
Click on Image to Enlarge >
Features:
  • Licensed, highway legal trailer. 
  • Dual 7,000 lb axles. 
  • Electric brakes. 
  • Fan and dust collector rated for 14,000 CFM @ 20” W.C. 
  • Four (4) dust inlets, 18” diameter, only two (2) are to be used at one time.
  • Automatic reverse compressed air pulse cleaning system for filters. 
  • ¾” air piping for pulse cleaning system. 
  • Air requirements for pulse cleaning system, 30 CFM @ 90 to 100 PSIG. 
  • Driven by a 50 HP John Deere engine with PTO clutch or 50 HP TEFC electric motor. 
  • 12 VDC/460 VAC control box. 
  • 100 gallon diesel fuel tank. 
  • Eighteen (18) MERV 11 rated cartridge filters , part #1000 0300
  • “On-board” flexible duct hose storage (up to 150 feet). 
  • Adjustable inlet damper on the fan inlet for regulating the airflow. 
  • Secure (lockable) engine and fuel tank compartment. 
  • Ratchet take-up for easy belt tensioning. 
  • Dual speed hand crank for auger to remove dust from collection hopper. 
  • Dust discharges in standard 55 gallon drum (drum supplied by customer). 
  • “On-board” lockable toolbox
Notes:
  1. Not intended to be towed with any dust in collection hopper. 
  2. Recommend emptying dust every 2 to 4 hours depending on collection rate. 
  3. It is recommended that all new filters be coated with precoat dust prior to putting into service. 
  4. Tow vehicle must be of sufficient size and weight to safely and legally tow the machine. 
  5. Tow vehicle must be equipped with a pintle style hitch. 
  6. Tow vehicle must be wired for towing. (Customer to provide matching plug and receptacle for the tow lighting.)